Table of Contents
Advertisement
Each performed softener rinse (possible more than
one in the same cycle) may prolong the programme
duration by another 5 minutes when it occurs at any
point at the beginning or in the middle of a
programme.
All the consumption values mentioned
in this section are determined in line
with the currently applicable standard
in laboratory conditions with water
hardness 2.5mmol/L (water softener:
level 3) according to the regulation:
2019/2022 .
The pressure and the temperature of
water as well as the variations of the
mains supply can change the values.
How to set the water softener level
Make sure the appliance is in user mode.
1. Press
.
•
The indicator
•
The remaining indicators are off.
•
The display shows the current setting: e.g.
= level 5.
2. Press
repeatedly to change the setting.
3. Press the on/off button to confirm the setting.
THE RINSE AID EMPTY NOTIFICATION
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically released
during the final rinse.
When the rinse aid chamber is empty, the rinse aid
indicator turns on. If the drying results are
satisfactory while using multi-tablets only, you can
deactivate the notification for refilling the rinse aid.
However, for best drying performance, always use
rinse aid.
If standard detergent or multi-tablets without rinse
aid are used, activate the notification to keep the
rinse aid refill indicator active.
How to deactivate the rinse aid empty
notification
Make sure the appliance is in user mode.
1. Press
.
•
The indicator
•
The remaining indicators are off.
•
The display shows the current setting.
–
= the rinse aid empty notification
is deactivated.
–
= the rinse aid empty notification
is activated.
still flashes.
still flashes.
2. Press
to change the setting.
3. Press the on/off button to confirm the setting.
AIRDRY
AirDry improves the drying results with less energy
consumption. The appliance door opens
automatically during the drying phase and remains
ajar.
AirDry is automatically activated with all
programmes other than
The duration of the drying phase and the door
opening time vary depending on the selected
programme and options.
When AirDry opens the door, the display shows the
remaining time of the running programme.
CAUTION! Do not try to close the
appliance door within 2 minutes after
automatic opening. This can cause
damage to the appliance.
If, afterwards, the door is closed for at
least 3 minutes, the running
programme ends.
CAUTION! If children have access to
the appliance, we advise to deactivate
AirDry. The automatic opening of the
door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press
.
•
The indicator
•
The remaining indicators are off.
•
The display shows the current setting:
–
= AirDry is deactivated.
–
= AirDry is activated.
2. Press
to change the setting.
3. Press the on/off button to confirm the setting.
(if applicable).
still flashes.
11
Advertisement
Table of Contents
