Compaq IJ600 User Manual page 6

Load up to:
10 envelopes
10 greeting cards, index
cards, postcards, or
photo cards
25 sheets of photo
paper or photocards
20 sheets of banner
paper
Note: Make sure you
select Banner or Ban-
ner A4 paper size in
the Printer Properties.
For help, see page 5.
10 transparencies
100 sheets of custom-
sized paper
25 iron-on transfers
•
•
2
Chapter 1
•
•
•
Loading specialty papers
Make sure:
• The print side is facing you and the
paper guide is against the side of the
envelopes.
• The stamp location is in the upper left
corner.
• The envelopes are loaded vertically
against the right side of the sheet
feeder.
• The print side is facing you and the paper guide is against
the side of the cards.
• The cards are loaded vertically against the right side of the
sheet feeder.
• The glossy or coated side is facing you.
• The paper guide is against the side of the paper.
• You place the banner paper
behind the printer. Then bring
the unattached edge of the
first page over the printer and
into the sheet feeder.
• The paper guide is against the
side of the paper.
• The rough side of the transparency is facing you (smooth
side down).
• The paper guide is against the edge of the transparencies.
• The print side is facing you and the paper guide is against
the side of the paper.
• Your paper size fits within these dimensions:
- Width:
76 mm to 215.9 mm
3.0 in.to 8.5 in.
- Length:
127 mm to 432 mm
5.0 in. to 17.0 in.
• You load the iron-on transfers following the instructions on
the package.
• The paper guide is against the side of the iron-on transfers.