Page 2
4' Champion Rectangle Table, Free Standing 924-101 Do Not Drill Out This Hole On The Seat/Back. Assembly Instructions 1. Drill out holes. 2. Attach both legs to the inside of table support bar. (See view above) 3. Attach the seats to the legs. 4.
Page 4
4' Champion Perforated Metal Rectangle Table, Free Standing 924-1P1 Do Not Drill Out This Hole On The Seat/Back. Assembly Instructions 1. Drill out holes. 2. Attach both legs to the inside of table support bar. (See view above) 3. Attach the seats to the legs. 4.
Page 5
924-108 638-011 638-012 638-025 638-020 Part No. Description Qty. 642-011A 4’ Champion Table 1Ped 622-011A 4’ Champion Seat 1 Ped 638-020 6” Pedestal DB 638-011 Seat Support Arm 638-012 Table Top Arm 638-025 Seat Arm 516-023 3/8” SS Flat Washer 516-028 3/8”...
Page 6
924-108 Single Pedestal Direct Bury 4’ Champion Table 1 Bore a 12-14” diameter hole 36” into the ground. 2 Place 4-6” of pea rock in the hole. 3 Place center pedestal post into the hole. 4 Drill out the holes in the center pedestal and the seat arm mounting plate with a 1/2” drill bit.