Selecting The Sound You Want - JVC HR-S7600EK Instructions Manual

Hide thumbs Also See for HR-S7600EK:
Table of Contents

Advertisement

Selecting The
Sound You
W a nt
1
AU D IO
2
1
2
Soundtra ck Selection
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you
select.
D uring Playback
Pressing AU D IO on the remote control changes the soundtrack being played back as follows:
Recorder's Front Panel
+
NORM
+
+ NORM
Downloaded from:
https://www.usersmanualguide.com/
– –:– –
1
2
3
4
5
6
7
8
9
3
4
0
4
3
TRACK
On-Screen Display
HI FI
L
R
HI FI
L
HI FI
R
NORM
HI FI
NORM
Receiving N ICAM Stereo
And Bilingua l Progra mmes
Your recorder is equipped with a Digital stereo sound
decoder (NICAM), making reception of stereo and
bilingual broadcasts possible.
When the recorder is tuned to a different station, the type
of broadcast being received will be displayed on the TV
screen for a few seconds.
Type of Broadcast
Being Received
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
● To listen to a stereo programme, press
and " " appear on the front display panel or "HI FI L
R" appears on the screen.
● To listen to a bilingual programme, press
either " " or " " appears on the front display panel or
"HI FI L
required).
● To listen to the Standard (regular monaural) audio while
receiving a NICAM broadcast, press AU D IO until
"NORM" appears on the front display panel or on the
screen.
N O TES:
● The NICAM audio programme will be recorded on the
Hi-Fi audio track, and the Standard audio programme on
the normal audio track.
● If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
● Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Soundtrack Selection" (See
below).
● "O.S.D." must be set to "ON" or the on-screen displays
will not appear (
U SE
For Hi-Fi stereo tapes
For main audio of Bilingual tapes
For sub audio of Bilingual tapes
For audio-dubbed tapes
For audio-dubbed tapes
O n-screen D isplay
(none)
ST NICAM
BIL NICAM
NICAM
AU D IO until " "
" or "HI FI
R" appears on the screen (as
pg. 39).
N O TES:
● "
+
" should normally be
selected. In this mode, Hi-Fi stereo
tapes are played back in stereo, and
the normal audio track is played
back automatically for tapes with
only normal audio.
● For instructions on recording
NICAM stereo and bilingual
programmes, see above.
● Bilingual programmes are not currently
broadcast in the U.K.
● "O.S.D." must be set to "ON" or the
on-screen displays will not appear
(
pg. 39).
27
AU D IO until

Advertisement

Table of Contents
loading

Table of Contents