Download Print this page

JVC MC-R434U Instructions Manual

Dvd-ram/r drive
Hide thumbs Also See for MC-R434U:

Advertisement

Quick Links

MC-R434U
Thank you for purchasing the JVC MC-R434U DVD-RAM/R DRIVE.
Before you start operating this unit, please read the instructions
carefully in order to obtain the best possible performance.
This instruction book is made from 100% recycled paper.
Downloaded from:
https://www.usersmanualguide.com/
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located at the top of the
unit. Retain this information for future
reference.
Model No. MC-R434U
Serial No.
LST0172-001A

Advertisement

loading

Summary of Contents for JVC MC-R434U

  • Page 1 Retain this information for future reference. Model No. MC-R434U Thank you for purchasing the JVC MC-R434U DVD-RAM/R DRIVE. Before you start operating this unit, please read the instructions Serial No. carefully in order to obtain the best possible performance.
  • Page 2: Installation Flow

    Page 4, 5 Procedure for Connecting the Cables to the Back of the MC-R434U SETUP ● Set the SCSI ID of the MC-R434U and close the door of the CD/ DVD Library. Procedure for Setting the DIP Switch Page 5...
  • Page 3 Remove the screws from the drive storage cover of the CD/DVD Library. Drive storage section Remove the drive storage cover. Procedure for Determining the Setup Position for MC-R434U Drive locking screw mounting hole Drive No. 6 Drive No. 5 Drive No. 4 Drive No.
  • Page 4 Insert the MC-R434U slowly until the screw installation hole cable to the connectors at the rear of the MC-R434U. located on the side of the MC-R434U and the screw instal- When using the MC-8100LU, the No. of the cable must lation hole located on the drive locking section are aligned.
  • Page 5 Connecting the cables SETUP ● Set the SCSI ID of the MC-R434U and close the door of the CD/DVD Library. Always turn the power of the CD/DVD Library off when the dip switches are moved. For the details of the default factory settings, please refer to the section "SCSI ID No.
  • Page 6 EXECUTION OF AUTO- Procedure for Connecting the CD/DVD MATIC DRIVE DETEC- Library to the Host Computer TION MODE. Use an Ultra160-compatible cable as the external SCSI cable. ● Execute the automatic drive detection mode of the CD/DVD Library. For the automatic drive detection mode, refer to the instruction manual for the CD/DVD Library.
  • Page 7: Specifications

    Ricoh Company Ltd. CD-ROM : 150 ms Mitsubishi Kagaku Media Corp. *The above values were measured using JVC's measure methods. * Note 1: It is recommended to write and read the DVD-R, DVD-RAM, CD-R and CD-RW discs using the drives Buffer capacity of the same model.
  • Page 8 VICTOR COMPANY OF JAPAN, LIMITED is a registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered Trademark in JAPAN, the U.S.A., the U.K. and many other countries. Printed in Japan © 2003 VICTOR COMPANY OF JAPAN, LIMITED LST0172-001A Downloaded from: https://www.usersmanualguide.com/...
  • Page 9 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...