Logitech Z333 Speaker With Subwoofer Setup Guide

KNOW YOUR PRODUCT

CONNECT THE SPEAKERS

1. Plug the black RCA connector on the right satellite into the black subwoofer jack
2. Plug the blue RCA connector on the left satellite into the blue subwoofer jack
3. Plug the power plug into an electrical outlet

CONNECT TO AUDIO SOURCE

1. 1. For 3 5 mm connection:
      Connect the 3 5mm plug from the subwoofer to the audio jack on your device (computer, tablet, smartphone, etc )
   2. For RCA connection:
      Connect one end of the RCA cable to the corresponding RCA jack on the back of the subwoofer
      Insert the other end of the RCA cable into the RCA outlet on your device (TV, Gaming Console, etc)
      Note: The RCA cable is not included in the box and must be purchased separately
2. Plug your headphones into the headphone jack on the control pod Adjust the volume either from the control pod or the audio source
3. Power speakers on/off by sliding the power on/off button on the wired control pod

CONNECT TO TWO DEVICES SIMULTANEOUSLY

1. Connect to two devices at the same time through the RCA connector on the back of the subwoofer and the 3 5mm cable on the subwoofer
2. To switch between audio sources just pause audio on one connected device and play audio from the other connected device

ADJUST THE VOLUME

1. Adjust the volume of Z333 with the knob on the control pod
   Turn the knob clockwise (to the right) to increase volume
   Turn the knob counter-clockwise (to the left) to decrease volume

ADJUST THE BASS

2. Adjust the bass level by turning the bass control knob located at the back of your subwoofer
   Turn bass knob to the right for deeper bass or to the left for less bass