Advertisement
Forward Collision Warning (FCW) With Mitigation
FCW with Mitigation can provide both audible and visual warnings, and may also apply a brake jerk
to warn you of a potential frontal collision. The warnings and limited braking are intended to provide
you with enough time to react, and avoid or mitigate the potential collision.
The system can be turned on or off through your touchscreen.
You can also use your touchscreen to adjust the system's
sensitivity and active braking status.
Select between the following
sensitivity settings:
•
Near
•
Medium
•
Far
KEEP IN MIND:
The default settings are "Medium" and "Warning + Active Braking". This allows the
FCW system to warn the driver of a possible collision with the vehicle in front using
audible/visual warnings while applying autonomous braking. The system will retain
the last setting you have selected when you turn on your vehicle.
Select between the following
brake settings:
•
Warning + Active Braking
•
Only Warning
•
Off
Active Lane Management (ALM)
The Active Lane Management system detects lane markings or road edges and measures your vehicle's
position within the lane boundaries. It uses Blind Spot Monitoring (BSM) to detect vehicles in adjacent lanes
while you are preparing to change lanes.
To turn the system on, push the ALM button on the switch panel below the Uconnect screen. To turn the
system off, push the button again (the LED on the button will turn on when the system is off).
When your vehicle approaches or crosses your lane, the ALM system may provide a visual warning in
the instrument cluster, steering assist torque, haptic steering wheel vibration, and/or automatic steering
assistance. This is dependant on how many lane markings are detected (one or both), whether or not
you apply your turn signal, and your Uconnect Settings selections.
Scan For
You can select from the following warning
FCW Video
types in your Uconnect Settings:
•
Vibration Only
•
Steering Assist Only
•
Vibration And Steering Assist
Scan For
KEEP IN MIND:
ALM Video
You can also adjust intensity of the
steering wheel vibration, steering
assist warning, and the warning zone
sensitivity in Uconnect Settings.
Advertisement
