Sun Roof; Windshield - Komatsu PC130-7 Operation & Maintenance Manual

DETAILED CONTROLS AND GAUGES

SUN ROOF

When leaving the operator's seat, set the safety lock lever
securely to the LOCK position (L).
If the safety lock lever (1) is at the FREE position (F) and
the control lever is touched by mistake, this may lead to a
serious accident.
Opening
1. Set safety lock lever (1) securely to the LOCK position.
2. Check for any ceiling window movement by pulling lock
knob (A) located on front side, then push up and open the
ceiling window grasping grip (B).
Closing
Grip handle (B), then lower the sun roof and apply lock (A). If the lock does not click into position, open the sun
roof and pull it down again.

WINDSHIELD

q When opening or closing the front window, bottom
window, or door, always set the safety lock lever (1) to
the LOCK position (L).
If the control levers are not locked and they are
touched by accident, this may lead to a serious acci-
dent.
q When opening or closing the window at the front of the
cab, stop the machine on horizontal ground, lower the
work equipment completely to the ground, stop the
engine, then carry out the operation.
q When opening the front window, hold the grip securely
with both hands, pull up, and do not let go until the
automatic lock catch is locked.
q When closing the front window, the window will move
quicker under its own weight. Hold the grips securely
with both hands when closing it.
It is possible to stow (pull up) the front window in the roof of the operator's compartment.
3-26
WARNING
WARNING
OPERATION
3
3