Table of Contents
Advertisement
N U M BER
STO P+/ –
PRO G
Satellite Tuner U sers
To timer-record a satellite broadcast using G-
1 Perform steps
1 – 6 .
2 Set the satellite tuner to the appropriate channel before
the selected programme begins.
3 Leave the satellite tuner's power on.
Downloaded from:
https://www.usersmanualguide.com/
1
2
3
2
4
5
6
7
8
9
TIM ER
0
4
1
O K
PU SH JO G
CODE
RETURN TO N O RMAL
SCREEN
5
Press PRO G or O K . "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen
appears.
● Repeat steps
EN GAGE RECO RDER' S
TIMER MO DE
W EEKLY
6
Press TIM ER . The recorder turns off automatically and
" ‰ " appears on the display panel.
● To disengage the timer, press
N O TES:
● To Change The Stop Time . . .
. . . press STO P +/ – after pressing O K in step 3 . You can
compensate for anticipated programme schedule delays this
way.
● To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing O K in step 3 , press W EEKLY ( N U M BER key
"9") for weekly serials or DAILY ( N U M BER key "8") for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears
on the screen. Pressing the button again makes the corre-
sponding indication disappear.
● You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
● It is not possible to timer-record a TV programme with a
G-
CODE
ATTEN TIO N
:
Regarding Guide Program N umber Set
"G-CODE/SHOWVIEW SETUP" appears after performing
step 3 if the Guide Program number for the G-
you entered has not been set.
● Press the
channel position number on which your recorder
receives that station, then press O K or PU SH JO G
The G-
G-CODE/SHOWVIEW SETUP
GUIDE PROG
[0-9] OR [5/ ∞ ]:SELECT =
[PROG] : EXIT
1 – 5 for each additional programme.
pg. 28).
number which starts with "0".
N U M BER keys or PU SH JO G
program screen appears.
CODE
(Ex.) To timer-record a RTR
programme with G-
TV PROG
* If your recorder receives
RTR on the channel position
2
– –
2, press O K or PU SH J O G
after entering "2".
25
EN
TIM ER again.
number
CODE
%fi to input the
.
.
CODE
Advertisement
Table of Contents
