Table of Contents
Advertisement
18
EN
Recording
Fea tures
[J711EU ]
STANDBY/ON
[J668EU ]
STANDBY/ON
TV/ VCR
0000
Insta nt Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
ST ART RECO RDIN G
Press RECO RD on the recorder.
1
EN GAGE ITR MO DE
Press RECO RD again. "
2
the front display panel.
SET RECORDIN G DURATION
If you want to record for more than 30 minutes, press
3
RECO RD to extend the time. Each press extends
recording time by 30 minutes.
N O TE:
You can only perform ITR using the RECO RD button on the
recorder's front panel.
Downloaded from:
https://www.usersmanualguide.com/
DISPLAY
TIMER
REC LINK
TV PROG
DISPLAY
TIMER
REC LINK
TV PROG
– –:– –
1
2
3
2
4
5
6
7
8
9
0
4
TV PRO G
" blinks and 0:30 appears on
Record O ne Progra mme
W hile W a tching Another
If your recorder is connected to the TV via AV connection, . . .
. . . press TV/ VCR . The recorder's VCR indicator and the TV
broadcast being recorded disappear.
SELECT CHAN N EL TO
WATCH
Once recording is in progress, all you need to do is to
1
set the channel controls on the TV for the station you
wish to view.
● The programme selected with the TV's channel
RECO RD
controls appears on the TV screen while the one
selected with the recorder's TV PRO G buttons is
recorded on the tape.
● If a decoder is connected to the recorder (
you can select a scrambled channel as well with the
TV channel controls.
RECO RD
Ela psed Recording Time
Indica tion
You can check the exact time of a recording.
SET CO UN TER DISPLAY
Press D ISPLAY or – –:– – until a counter reading
1
appears on the display panel.
RESET CO UN TER
Press 0000 before starting recording or playback.
2
● The counter is reset to " 0:00:00" and shows the exact
elapsed time as the tape runs.
Ta pe Rema ining Time
DISPLAY REMAIN IN G TIME
Press D ISPLAY or – –:– – until the time remaining on
1
the tape appears.
● The display panel shows the tape remaining time
with "
● By pressing the
display to show the counter reading, channel
position*, clock time or tape remaining time.
* channel position is not displayed during playback.
N O TE:
Depending on the type of tape used, there may be times when
the tape remaining time reading may not appear right away, or
is not correct. "– –:– –" may sometimes appear, or the display
may blink on occasion.
RECO RD IN G (cont.)
" displayed.
– –:– – button, you can change the
pg. 34),
Advertisement
Table of Contents
