Nedis LOCKBTB10xx, LOCKBTF10xx, LOCKBTP10xx - Bluetooth Padlocks Quick Start
Description
1. | Button or fingerprint reader with indicator | - The red light of the button flashes: The device is in operation.
- The blue light is on: The device is connected.
|
Install the app
Download and install the app "OKLOK" from Apple App Store (iOS) or Google Play Store (Android) on your mobile device.
Register and log in
| - Enter and send your E-mail adress.
|
| - Enter the verification code, that you receive by E-mail.
|
| - Register or reset the fingerprint settings, touch the back of the device (2).
|
| - Set the password and log in.
|
Pairing: 3 options
| - Scan the QR-code.
|
| - Press the button (1) to activate Bluetooth.
|
| - Enter the number of the device you want to add.
|
Use
- Press the button 1 (see figure above) to connect the device to your phone.
- Use the app or your fingerprint to unlock.
| - Use ''Settings" to disconnect an added device, including the embedded records, or to rename the device.
|
| - Authorize others to use the device: Add a friend as described below in 5. Select "Authorized" or "Unauthorized".
|
Personal Center
()
| - Enter your personal data in Personal Center: My info, My QR-code and setting (see 1 in figure above).
|
| - Add friend: Select in Personal Center: "My friends" and scan the QR code or account number of the other person.
|
| - Usage record: View the unlocking record, the shared record, the location informationor alarm information.
|
Safety
- Read the manual carefully before use. Keep the manual for future reference.
- The manufacturer is not liable for consequential damages or for damages to property or persons caused by nonobservance of the safety instructions and improper use of the device.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
Battery safety
- Use only the batteries mentioned in the manual.
- Do not use old and new batteries together.
- Do not use batteries of different types or brands.
- Do not install batteries in reverse polarity.
- Do not short-circuit or disassemble the batteries.
- Do not expose the batteries to water.
- Do not expose the batteries to fire or excessive heat.
- Batteries are prone to leakage when fully discharged. To avoid damage to the product, remove the batteries when leaving the product unattended for longer periods of time.
- If liquid from the batteries comes into contact with skin or clothing, immediately rinse with fresh water.
Cleaning and maintenance
- Before cleaning or maintenance, always switch off the device, remove the mains plug from the wall socket and wait until the device has cooled down.
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Do not immerse the device in water or other liquids.
- Clean the outside of the device using a soft, damp cloth. Thoroughly dry the device with a clean, dry cloth.
Support
If you need further help or have comments or suggestions please visit www.nedis.com/support
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Nedis LOCKBTB10xx, LOCKBTF10xx, LOCKBTP10xx - Bluetooth Padlocks Quick Start
Need Assistance?
Do you have a question about the LOCKBTB10xx that isn't answered in the manual? Leave your question here.