Table of Contents
Advertisement
Z4M-WR
J ENVIRONMENT
Install the sensor in clean environment ensuring that the
•
filter on the sensor's front panel is kept free from oil and
dust.
Do not install the Laser Displacement Sensor in a strong
•
electromagnetic field or in an environment where the op-
eration of the sensor is subjected to the reflection of in-
tensive light (such as, light from a laser beam or an elec-
tric arc welding machine).
The Laser Displacement Sensor cannot accurately detect
•
objects that are mirror-like, transparent, inclined or have
an extremely small reflection ratio (smaller than the
sensor's sensing spot diameter).
J MAINTENANCE
DANGER!
Never disassemble the sensor. Users expose
themselves to the risk of laser radiation if they
disassemble the device.
Do not attempt repairs or maintenance of the Z4M. The
Z4M contains no user serviceable parts. Refer all servicing
to an authorized OMRON agent.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
1-800-55-OMRON
Cat . No. G C M S E N4
R
OMRON ON- -LINE
Global -- http://www.omron.com
USA -- http://www.omron.com/oei
Canada -- http://www.omron.com/oci
4/ 01
S pec i f i c at i ons s ubj ec t t o c hange wi t hout not i c e.
J CLEANING
If the filter is affected by oil or dust, clean it as follows:
1. Use a small device that blows air (as is used to clean
camera lenses) to remove dust particles from the sur-
face.
Do not attempt to blow the dust away with your mouth.
2. Use a soft cloth (for lenses) moistened with alcohol to
remove the remaining dust. Do not use a scrubbing ac-
tion when cleaning; a scratch on the filter could result in
the sensor malfunctioning.
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
416-286-6465
Z4M-WR
P ri nt ed i n U. S . A .
Advertisement
Table of Contents
