Table of Contents
Advertisement
Installation
Step 4 - Insert the G740A/G740B Graphics
Accelerator card.
Locate the empty AGP socket on the motherboard and use the following
instructions to insert the G740A/G740B Graphics Accelerator card into
that socket:
Grasp the G740A/G740B Graphics Accelerator card by its edges.
Align it with the empty AGP socket on the motherboard, and gently insert
it into place.
Make sure that the card is pressed evenly and completely into the socket.
Fasten the card with the bracket screw.
Note: Use the figure above to help locate the Accelerated Graphics Port
(AGP) socket on your motherboard. The exact configuration of
the components on your motherboard may differ from the figure.
Look for a single, smaller socket between the set of PCI sockets
and the processor.
2-3
Advertisement
Table of Contents
