Display Bezel - Dell Latitude D531 Service Manual

1 display assembly
Replacing the Display Assembly
NOTICE:
1. Align the display hinges with the holes in the base of the computer, then lower the display into place.
2. Replace the two M2.5 x 5-mm screws that secure the display on the back of the computer.
NOTICE:
3. Connect the display cable to the system board.
4. Connect the Mini-Card antenna cables (see
5. Replace the keyboard (see
6. Replace the hinge cover (see
7. Close the display.
8. Replace the two M2.5 x 5-mm screws (labeled "D") that secure the display on the bottom of the computer.
Display Bezel
Removing the Display Bezel
CAUTION:
NOTICE:
as the back panel on the computer.
1. Follow the instructions in
2. Remove the hinge cover (see
3. Remove the keyboard (see
4. Remove the display assembly (see
Great user manuals database on
2 antenna cables (3)
Ensure the antenna cables are not twisted and that they are lying flat in the antenna cable clip.
Using the plastic tabs on the base of the computer, ensure that cables are properly routed and secured.
Replacing the
Replacing the Keyboard).
Replacing the Hinge
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such
Before Working Inside Your
Removing the Hinge
Removing the Keyboard).
Removing the Display
UserManuals.info
3 display cable pull tab
Mini-Card).
Cover).
Computer.
Cover).
Assembly).