Advertisement
Quick Links
RADIO CONTROLLED ALARM CLOCK
INTRODUCTION
Congratulations on purchasing the BHM-612A Radio Controlled
Alarm Clock.
A smart-looking and easy-to-operate timepiece, the BHM-612A
is designed to automatically synchronize the current time and
date with the U.S. Atomic Clock.
The BHM-612A is also equipped with a daily alarm clock plus
date and multilingual weekday display.
FEATURES & KEY CONFIGURATION
D
E
MODEL : BHM-612A
USER'S MANUAL
A RF SIGNAL INDICATOR
- Indicates the signal-receiving status of the unit
B MAIN WINDOW
- Displays the current time with seconds or day-of-the week
C SECONDARY WINDOW
- Displays the alarm time and its status or date
D [ MODE/SET ] button
- Changes between seconds and weekday display (Main
window) or between calendar and alarm clock display
(secondary window)
- Holds to activate the clock setting mode
E [ UP ] button
- Increases the value of a setting by one unit
F [ ZONE ] button
- Press to sequence through the 4 U.S. time-zones: Pacific,
Mountain, Central or Eastern.
G [ALARM] button
- Changes the display and operating status of the alarm
clock
A
H [RESET] button
- Returns all settings to the factory set default values
1. Open the battery compartment by removing the screw at the
bottom of the unit.
B
2. Pull out the battery holder and insert two AAA-sized (UM-4)
batteries in accordance with the polarities shown.
3. Slide back the battery holder into the compartment and fasten
the screw.
C
4. Press RESET with a blunt stylus.
5. When the low battery indicator [
follow the above procedures to replace the unit with new
batteries.
Note The unit will automatically search for the radio signal
G
when batteries are first installed. When the BHM-612A is
F
new and just out of the box, allow up to 72 hours for the
unit to receive the US Atomic Clock signal. To facilitate
reception, place the BHM-612A on a window sill away
from other signal emitting equipment such as TVs, radios,
PCs and microwaves. Stronges signal reception is be-
tween midnight and 4AM.
H
1
BATTERY INSTALLATION
] appears on the display,
Advertisement
Related Manuals for Oregon Scientific BHM-612A
Summary of Contents for Oregon Scientific BHM-612A
-
Page 1: Battery Installation
A smart-looking and easy-to-operate timepiece, the BHM-612A is designed to automatically synchronize the current time and date with the U.S. Atomic Clock. The BHM-612A is also equipped with a daily alarm clock plus date and multilingual weekday display. FEATURES & KEY CONFIGURATION MODEL : BHM-612A USER’S MANUAL... -
Page 2: How To Set The Calendar Clock
HOW TO ENABLE OR DISABLE AUTO- To disable the automatic signal reception feature and cause the BHM-612A to operate as a quartz clock, hold down [ZONE] for three seconds. To enable the feature again, hold down the [UP] button for three seconds. -
Page 3: Specifications
THE RESET BUTTON The [RESET] button is used to clear all user selected or pro- grammed settings and to cause the settings to return to their factory set defalut setting. Use a blunt stylus to hold down the button. TABLE-STANDING OR WALL-MOUNTING Table-Standing: The BHM612A unit comes with a stand connector for connecting it to other modular units in the same series. - Page 4 CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display. — The contents of this manual may not be reproduced without the permission of the manufacturer.