Change Password - Optoma EX330 User Manual

User Controls
Setup | Security
34
English
■
First Time:
1. The Password is 4 digits, DEFAULT VALUE is "1234". (first time)
2. Use number buttons on the remote to select your password, and then press
" " key to confirm your selection.

Change Password

1. Press " " to input old password.
2. Use number button to enter current password, and then press
" " key again to reveal next OSD menu.
3. Scroll down to highlight Password, and then press "
activate.
4. Enter new password (4 digits in length) using the number
buttons on the remote, then press "
5. Enter new password again and press "
" to
" to confirm.
" to confirm.