Image-Ii (Video Mode) - Optoma EP 738 User Manual

User Controls
Video Mode
Language
Image-I
Degamma
Saturation
Tint
Sharpness
Aspect Ratio
16:9 Image Position
"Saturation", "Tint"
and "Sharpness"
function is not
supported under
DVI-D mode.
English ...
24
Management Lamp setting
Image-II Audio
Press Enter to Set
Degamma
This allows you to choose a degamma table that has been fine-
tuned to bring out the best image quality for the input.
Saturation
Adjusts a video image from black and white to fully saturated
color.
Press the
4
Press the
4
Tint
Adjusts the color balance of red and green.
Press the
4
Press the
4
Sharpness
Adjusts the sharpness of the image.
Press the
4
Press the
4
Aspect Ratio
Use this function to choose your desired aspect ratio.
4:3 : The input source will be scaled to fit the projection
4
screen.
16:9 : The input source will be scaled to fit the width of the
4
screen.
Window: When a 4:3 image is bigger than a 16:9 screen,
4
select the "Window" mode to fit the image onto the screen
without changing the projection distance.
Image-II
(Video Mode)
to decrease the amount of color in the image.
to increase the amount of color in the image.
to increase the amount of green in the image.
to increase the amount of red in the image.
to decrease the sharpness.
to increase the sharpness.