Boot Functions; Boot Block; Quickboot; Silentboot - Compaq Deskpro 4000N Technical Reference Manual

Compaq personal computer user manual
Hide thumbs Also See for Deskpro 4000N:
Table of Contents

Advertisement

Chapter 8 BIOS ROM
8.2

BOOT FUNCTIONS

The system supports new system boot functions to support remote ROM flashing and PC97
requirements. This system also supports the EL Torito specification for bootable CDs.
NOTE: This system will not boot CDs intended for use in Compaq ProLiant and
ProSignia products.
8.2.1

BOOT BLOCK

This system includes 24 KB of boot block ROM that provides a way to recover from a failed
remote flashing of the system BIOS ROM. Early during the boot process, the boot block code
checks the system ROM. If validated, the system BIOS continues the boot sequence. If the
system ROM fails the check, the boot block code provides the minimum amount of support
necessary to allow booting the system from the diskette drive (bypassing the security measures)
and re-flash the system ROM with a ROMPAQ diskette. Since video is not available during the
initial boot sequence the boot block routine uses the keyboard LEDs to communicate status as
follows:
Num Lock
LED
Off
On
Off
On
The boot block area of ROM is always write-protected.
8.2.2

QUICKBOOT

The QuickBoot mode (programmable through the INT 15, AX=E845h call) skips certain portions
of the POST (such as the memory count) during the boot process unless the hood has been
detected as being removed. The QuickBoot mode is programmable as to be invoked always, never
(default) or every x-number of days.
8.2.3

SILENTBOOT

When in the SilentBoot mode, the boot process skips certain audio and visual aspects of POST
(such as the speed beeps and screen messages). Error messages are still displayed. The
QuickBoot mode is programmable (through the INT 15, AX=E845h call) as to either TERSE
(default) or VERBOSE mode.
8-2
Compaq Deskpro 4000N and 4000S Personal Computers
Caps Lock
Scroll Lock
LED
LED
On
Off
Off
Off
Off
On
On
On
First Edition - September 1997
Meaning
Administrator password required.
Boot failed. Reset required for retry.
Flash failed (set by ROMPAQ).
Flash complete (set by ROMPAQ).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Deskpro 4000s

Table of Contents