Table of Contents
Advertisement
9.
Check operation.
Press the test flash button on the sender.
The Speedlites fire. If they do not fire, confirm that they are within
transmission range (
10.
Take the picture.
Just as in normal flash photography, shoot after configuring the
camera.
Caution
Radio transmission is not possible when <
Double-check the transmission channels and wireless radio IDs of senders and
receivers. If you cannot connect with the same settings, restart the senders and
receivers.
Aiming the units in firing group C directly at subjects may cause overexposure.
Note
You can fire the modeling flash by pressing the camera's depth-of-field preview
button (
).
Auto power off takes effect in approx. 5 min. when the Speedlite is set as a sender.
To turn on a receiver that is in auto power off mode, press the sender test flash
button.
Test flash firing is not available while a camera's flash timer or similar functions are
active.
).
> is displayed on the LCD panel.
125
Advertisement
Table of Contents
