Table of Contents
Advertisement
•
The lifter can be switched on or off when charging the battery. It is recommended that the lifter
is switched off when not in use.
•
To make sure not to damage the cord when pulling it out of the electrical outlet - grab, and apply
the force to the plug. To prevent damage to the cord, never pull the cord itself always pull on the
plug.
•
It is recommended to charge the battery in a full cycle.
•
Never operate the lifter when the battery is charging (plugged in).
•
Charge the battery in a designated dry area.
•
Normal charging of the battery creates very small amounts of hydrogen. However, the casing is
ventilated, and thereby the risk of hydrogen collection is minimal.
Battery charging indicator
The color of the battery charging indicator communicates the following information:
Red
Chargin
Green
Ready/Standby
Operating panel
Grab the handles and push the lifter to move
it forward.
To move the platform up and down push the
buttons a and c.
The emergency button is found in the middle
of the control panel, b.
a. Down
b. Emergency stop
c. Up
•
Always move the lifter with the load in a lowered position.
•
If platform is lowered onto an object and is prevented from beeing lowered further down,
will belt still run. If belt hasn't fully tension there is a risk of platform falling down if object is
removed.
•
Make sure that the load is stable and secured on the platform.
•
Make sure the platform is loaded according to the load diagram at page 14.
a
b
c
Page 15
Advertisement
Table of Contents
