Pre-Programming Remote Controller - Onkyo HT-R500 Instruction Manual

Pre-programming remote controller

You can make RC-478M remote controller to operate a product
from other brand than Onkyo by storing the pre-programming code
of the brand in the RC-478M.
Brand TV
AIWA
AKAI 227
DENON
EMERSON 228
FISHER 200
GE
GE • PANA 201, 202
GE • RCA 203
GO VIDEO
GOLD STAR 204, 205
HITACHI 206, 207
JVC 208
KENWOOD
MAGNAVOX 209, 210
MARANTZ 211
MITSUBISHI
Learning a pre-programming code
1. Find the 3-digit number for the brand name of
the component that you want to operate in the
table on this page.
2. Turn on the component that you want to
operate (i.e. DVD, VCR, or television).
3. While holding down VCR, TV or DVD on the
RC-478M that you want to program, press ENT,
and then release both buttons.
4. Within 10 seconds, enter the 3-digit code
number.
To enable entry of the 3-digit code number, some of the remote
controller keys become the numeric keys with the assignment
as shown in the figure.
5. Press some operation buttons for the
component that you want to operate to check if
the system operates properly.
If the system operates properly, the code is correct. If the
component does not operate properly, return to step 3.
Notes
• With some brand's components, some buttons may not work
correctly.
• If more than one code is given in the table, try the code one by
one until you reach the code for your component (i.e. if the first
code does not work, then try the next).
36
VCR DVD
137
302, 309
100, 101, 102, 140
103, 104
105, 106, 107
108
103, 109 303
110, 111, 112, 113 304
305
114, 115, 116 306, 313
307
117, 118, 119, 120, 308, 313
121, 139
Brand TV
NEC
ONKYO
PANASONIC 212, 213
PHILIPS 214
PIONEER 215
PROSCAN 216
RCA 217, 218, 219,
220, 229, 230
SAMSUNG 221, 222
SHARP 223
SHINTOM
SONY 224
TOSHIBA
YAMAHA
ZENITH 225, 226
Numeric
buttons
ENT
VCR DVD
136
300, 301,
313
122, 123 309
114
310
311
109 311
124, 125, 126
127, 128
138
129, 130, 131, 312
132, 133, 141, 142
134 313
309, 314
135 313, 315
VCR
TV
DVD