Nuvo Parisian 60/2511 Assembly Instruction

NOTE:
Please consult a qualified electrician if you are not certain of the installation or servicing.
CAUTION:
Before starting the installation or servicing, disconnect the power by turning off the circuit
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the fixture, lay out all parts on a clean surface.
2. Tie ground wires from the fixture and from the Post together. Connect white wires from fixture to white
wire (neutral wire) from supply circuit. Connect black wires from fixture to black wire (live wire) from
supply circuit. Cover the connections using the provided Wire Connectors.
3. Fasten the Post Cap to Post using the Lock Screws provided.
4. Fasten Thread Rod into Bushing with Hex Nut.
5. Install the bulb. (Included).
6. Place the Shade, Decorative Pan, Top Cover and Decorative Part over the Thread Rod and secure them
with the Finial.
7. Turn on power. The photocell will automatically light on from dusk to dawn and will automatically
light off from dawn to dusk.
ASSEMBLY INSTRUCTION
SKU#60/2511
A Satco Product