Parameters; List Of Parameters - Ferroli KONA 12 Operating Instructions Manual

3.5 PARAMETERS

There is a list of parameters (that the user cannot modify), to make the water heater internal settings. The Parameters menu can be accessed from
STANDBY status by keeping the ECO button pressed for 5 seconds, until "PP" appears on the display. By touching the Standby
button, the first parameter "FA" appears on the display.
All parameters can be changed from the control panel. Use the "
Once the desired parameter has been selected, touch the Standby button to display its current value. To change the parameter value, touch the "
or " " buttons until obtaining the desired value.
To confirm the value, touch the Standby button, then return to viewing the list of parameters, to go forward or back to another parameter to be set.
After setting the desired parameters, it is necessary to go to the last parameter of the list "qU" (touching the "
button until reaching it), and from this parameter confirm the completion of configuration by touching the Standby
button, to exit and saving all the changes.

3.5.1 List of parameters

Par. Description
Unit adjustment:
FA - Type of water heater (12 L, 15 L, 17 L)
- Type of gas (G20, G31, G30, G25, G230)
PH TOTAL MAXIMUM PRESSURE – entire burner
FH Fan maximum speed – Entire burner
PL Minimum pressure – Entire burner
FL Fan minimum speed – Entire burner
dH Startup pressure
dF Fan speed during startup
P1 Minimum pressure – Burner minimum section
F1 Fan maximum speed – Burner minimum section
P2 MINIMUM PRESSURE – Burner minimum section
F2 Fan minimum speed – Burner minimum section
P3 Maximum pressure – Burner section 2
F3 Fan maximum speed – Burner section 2
P4 Minimum pressure – Burner section 2
F4 Fan minimum speed – Burner section 2
P5 Maximum pressure – Burner section 3
F5 Fan maximum speed – Burner section 3
P6 Minimum pressure – Burner section 3
F6 Fan minimum speed – Burner section 3
HC Fan safety exclusion speed at maximum pressure
LC Fan safety exclusion speed at minimum pressure
nE Burner continuous operation timing
nP Enable or disable operating status memory
FC Enable or disable solar energy function
S1 Solar function – On hysteresis
S2 Solar function – Off hysteresis
t1 Solar function – Burner ignition delay
nS Hot water maximum temperature setting
Minimum water flow rate options for start/stop
nL -- 0: 4/3.5 L/min -- 1: 3.5/3 L/min -- 2: 3/2.5 L/min
-- 3: 2.5/2 L/min -- 4: 2/1.5 L/min
qU EXIT and SAVE changes
Notes:
The parameters that have different values vary the operating mode (never the range) with respect to the initial parameter FA (water heater model
according to the type of gas and liters). The parameters highlighted in gray (from P3 to F6) appear in the list of real parameters only if the FA
value is between 6 and 15 (i.e. for all models except the 12-liter).
74
EN
" or " " buttons to scroll the list of parameters until reaching the parameter to set.
Range
KONA 12
1 - 15
G20 G31 G30 G25
G230
1 2 3 4
20 - F0 b7 dE C1 C6 b7
20 - F0 A4 A3 A3 A4 A3
20 - F0 6c 6F 6F 6c 6F
20 - F0 4E 4d 4d 4E 4d
20 - F0 83 8F 8F 83 8F
20 - F0 5F 4d 4d 5F 4d
20 - F0 C1 dA dA C1 dA
20 - F0 9b 98 98 9b 98
20 - F0 6d 75 71 6E 6E
20 - F0 53 4A 4A 53 4A
20 - F0
20 - F0
20 - F0
20 - F0
- - - -
20 - F0
20 - F0
20 - F0
20 - F0
20 - 89 67 Hz
20 - 89 34 Hz
OFF /
20 - 60
OFF - ON
OFF - ON
1 - 20
1 - 20
0 - 20
50 - 65
0 - 4
-
A73023750 - Rev. 01 - 02-2023
Default value
KONA 15
G20 G31 G30 G25
G230
5 6 7 8 9 10
9A bC A6 A9 9d
bb Ad b4 A5 bb
71 7d 75 7B 74
67 64 62 67 67
80 A0 A0 84 83
6A 60 75 6A 6A
A8 F0 d6 b7 Ab
dA C3 C8 dA dA
6E 83 7b 72 71
6d 77 76 6d 6d
97 bF b1 A0 9A
bE A3 Ad bE bE
66 70 6d 68 69
45 4E 4E 45 45
-
A5 d3 b6 b3 A8
C9 C8 C8 C9 C9
71 80 77 75 74
64 69 69 64 64
82 Hz
56 Hz
60 min
ON
OFF
10 °C
10 °C
10 s
50 °C
2
(3/2.5 L/min)
-
KONA
"
"
KONA 17
G20 G31 G30 G25
G230
11 12 13 14 15
A9 d3 b2 bC AC
Cd d1 Cd Cd Cd
71 7d 75 7B 74
67 64 62 67 67
80 A0 A0 84 83
6A 60 75 6A 6A
A8 F0 d6 b7 Ab
dA C3 C8 dA dA
6E 83 7b 72 71
6d 77 76 6d 6d
97 bF b1 A0 9A
bE A3 Ad bE bE
66 70 6d 68 69
45 4E 4E 45 45
A5 d3 b6 b3 A8
C9 C8 C8 C9 C9
71 80 77 75 74
64 69 69 64 64
82 Hz
56 Hz