Dog Signal Troubleshooting; Assigning A Dog Id Manually - Garmin Astro 320 Quick Start Manual

An error message could appear if there
is a conflict with the ID number of
another dog.

Dog Signal Troubleshooting

Each dog you track has its own ID
number. If two dogs within range of
the Astro have the same ID, the Astro
warns you of a conflicting ID signal.
Follow the on-screen instructions to
resolve the conflict.
When possible, you should allow the
Astro to automatically assign IDs. If
necessary, you can manually assign a
new ID number to a dog.

assigning a Dog iD Manually

This requires wireless communication
with the DC 40. You must turn on
the DC 40 and bring it within range
of the Astro. You must assign a new
ID number to the dog and change the
update rate.
1. From the main menu, press DOG
twice.
6
2. Select a dog.
3. Select Show Info.
4. Press MENU.
5. Select Comm. Settings.
6. Select an unassigned and
nonconflicting ID.
7. Change the update rate (optional).
Both 30-second and two-minute
rates reduce battery drain, but they
create a less-detailed dog track and
collected statistics.
8. Bring the Astro within a few feet of
the DC 40.
9. Follow the on-screen instructions.
Astro 320 Quick Start Manual