Software Problems; Printer Problems - Epson EL 486UC User Manual

Software Problems

application program
The
Check that you are following the correct procedure for starting
the program and that it is installed correctly. If you do not have
a hard disk, make sure the correct diskette is in the diskette
drive. If you need help, contact your software manufacturer.
application program
The
disk.
You may be running an application that requires a slower
processor speed. See Chapter 2 for information on changing the
processor speed.
Your application
unresponsive to keyboard commands.
Reset the computer and try again. If resetting the computer
does not help, turn it off, wait 20 seconds, then turn it on again.
Some software, like OS/2, Unix, or NetWare 3.11, needs a
minimum of 4MB to 8MB of RAM to work correctly. Check
your software documentation for the minimum memory
requirements. If necessary, add additional memory using the
instructions in Chapter 3.

Printer Problems

The printer does not work
Check that the printer has power and is properly connected to
the computer. Also make sure your printer has paper in it.
6-10 Troubleshooting
does not
having trouble reading a key
is
has locked the
at all.
start.
computer, making
if