Table of Contents
Advertisement
BEFORE FIRST USE
Before using your Filter Coffee Machine for the first time, ensure all
packaging is removed and clean all parts thoroughly (see Cleaning &
Maintenance Section).
INSTRUCTIONS FOR USE
1. Control Panel
a
b
c
d
e
a. Hour
b. Min
c. Brew / Off
d. Prog
e. Clean
2. Setting the Clock
When the unit is plugged in, the screen will show 12:00. Press and hold
the 'Hour' or 'Min' button, until the numbers start to flash. Then press the
'Hour' and 'Min' buttons to scroll through the numbers and set the time.
When the numbers stop flashing, the time has been set. The clock is 24hr
programmable.
3. Setting the Programme Timer
Press and hold the 'Prog' button until the blue indicator light shows and the
LCD display begins to flash with 12:00, this signals that you have entered
the 'Set Programme Time' mode. The desired time can be set by pressing
the 'Hour' and 'Min' buttons to scroll forward through the digits. Once the
time has been selected, press the 'Prog' button once, so the blue indicator
light is illuminated. Brewing will be begin at the programmed time.
N.B: The 'Prog' mode cannot be entered if the Filter Coffee Machine is in
a brew cycle.
N.B: When setting the programme time, ensure coffee and water are
placed in the machine before starting.
N.B: The display will show 'Prog' above the clock and the button will stay
illuminated to show that a timer has been set. To switch the timer off,
simply press the 'Prog' button, so it's no longer illuminted.
9
Advertisement
Table of Contents
