Simultaneous Operation Control - Panasonic CU-2E18NBU Service Manual

12. Simultaneous Operation Control

1 Operation modes which can be selected
using the remote control unit:
Automatic, Cooling, Soft Dry, Heating, e-ion
operation mode.
2 Types of operations modes which can be
performed simultaneously
Cooling operation and cooling, Soft Dry
o
or e-ion operation
Heating operation and heating operation
o
3 Types of operation modes which cannot be
performed simultaneously
While a cooling operation is in progress,
o
a heating operation cannot be performed
by an indoor unit in another room.
In the room where the operation button
for cooling was pressed first, the
operation is continued. In the room where
the operation button for heating was
pressed afterward, the operation lamp of
the indoor unit blinks, where the attempt
is made to establish the heating
operation. Its fan is stopped, and the air
does not discharged.
While a heating operation is in progress,
o
a cooling operation cannot be performed
by an indoor unit in another room.
In the room where the operation button
for heating was pressed first, the
operation is continued. In the room where
the operation button for cooling was
pressed afterward, the operation lamp of
the indoor unit blinks, where the attempt
is made to establish the cooling operation.
Its fan is stopped, and the air does not
discharged.
4 Operation mode priority control
The operation mode designated first by
o
the indoor unit has priority.
If the priority indoor unit stops operation
o
or initiates the e-ion operation, the priority
is transferred to other indoor units.
22