Adjust The Image; Using The Remote Control - Epson PowerLite 84 Quick Setup

4
Press the power button on the projector or remote control.
Power light
Power button
The power light flashes green, then stays on.
NOTE: To shut down the projector, press the
for the two confirmation beeps, then unplug it. You don't have to wait
for the projector to cool down.

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
If you're using a Windows notebook with the VGA cable, you may also
need to press the function key on your keyboard that lets you display
on an external monitor (allow a few seconds for the projector to sync up
after you press the key). It may be labeled CRT/LCD or have an icon such
as , and you may have to hold down the Fn key while pressing it.
NOTE: If you still see a blank screen or have other display problems, see
the troubleshooting tips in the User's Guide on your projector CD.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
Zoom
4
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
5
If your image looks like
projector to correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
power button twice, wait
or , you've placed the projector off to
or
or , press the buttons on the
Turn projector
on and off
Turn off projector
display and sound
Change
presentation
slides (USB cable
connection only)
Navigate
projector
menus
You can use the remote control to operate the projector. With the USB cable,
you can use the remote as a wireless mouse. For more information on using
the remote control, see the User's Guide on your projector CD.
Where to get help
In the U.S. and Canada, see the sections below.
In Latin America, see the information on your Guía de instalación or Guia de
instalação sheet.
Manuals
For more information about using the projector, install the manuals from your
projector CD.
Telephone Support Services
To use the Epson PrivateLine ® Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6 to 6
AM PM
the duration of your warranty period. You may also speak with a projector
support specialist by dialing:
(562) 276-4394 (U.S.) or (905) 709-3839 (Canada), 6
Monday through Friday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Internet Support
Visit epson.com/support for solutions to common problems. You can
download utilities and documentation, get FAQs and troubleshooting advice,
or e-mail Epson with your questions.
Registration
Register today to get product updates, special promotions, and customer-only
offers. You can use the CD included with your projector, or register online at
www.epson.com/webreg.
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2009 Epson America, Inc. 12/09
Printed in XXXXXX
Choose which
source to display
Open a menu item
assigned by the user
Control projector volume
, Pacific Time, Monday through Friday, for
to 6 , Pacific Time,
AM PM
CPD-27795