Option Interface(Usb & Serial & Ethernet) - BIXOLON XD3-40t Series User Manual

3-3-2 Option Interface(USB & Serial & Ethernet)
Connect the interface cable as shown below.
This printer supports the following communications interface standards.
- Serial(RS-232C) Cable
- LAN(Ethernet) Cable
- USB B-Type Cable
LAN(Ethernet) Cable
1) Turn off the power switch.
2) Connect the communication cable to the printer communication port to be used.
- Connect the serial(RS-232C) cable to the serial port and tighten the screw
on both sides.
- Connect the LAN(ethernet) cable to the Ethernet port.
- Connect USB B-Type cable to the USB port.
Caution
Ver. 1.00
USB B-Type Cable
Be aware that the product's electronic components may be damaged
due to discharging of electrostatic energy that accumulates on the
surface of the body or other objects.
Serial(RS-232C) Cable
- 16 -
XD3-40t Series