Epson PictureMate Show PM 300 User Manual page 11

Note: Load a maximum of 20 sheets at a time. Load
your paper glossy or whiter side up to prevent smearing.
5
Store any unused paper in the original package
and keep it flat in a dry area to prevent curling.
Note: When you need more paper, order a PictureMate
Print Pack. See page 56 for more information.
6
Attach the output tray.
Using the P On Button
P
You can use the On button on the remote control
to place PictureMate in standby mode and save
energy.
1
P
Press the On button on the side of PictureMate
to turn it on. The power light turns green.
Note: If you are not using PictureMate, a slideshow of
your photos begins automatically after 3 minutes. Press
any button to return to the function you were using.
2
When you're finished using PictureMate, press the
P
On button on the remote control. The power
light turns orange.
3
P
Press the On button on the remote control or
on the side of the printer to return PictureMate to
full operation.
Note: To turn PictureMate off completely, use the
button on the side of the printer.
P
On
11