Epson Stylus Pro 3800 Start Here Manual page 3

Install Software for a USB Connection
Your printer software works with Windows
OS X 10.3.9 to 10.4.x. If you are using the USB interface, follow the steps below to install the printer
software. If you are using the Ethernet
configure the printer and install the software.
Macintosh
1
Make sure your Macintosh and printer are turned on.
2
Connect the USB cable.
3
Insert the Epson Stylus Pro 3800 printer CD. If necessary, double-click the Epson CD-ROM
desktop icon.
4
Double-click the
5
Double-click User's Guide and Network Guide
to install the manuals.
6
Double-click Stylus Pro 3800 Driver and follow the
instructions to install the printer driver and utilities.
When you see the message that the installation was
successful, click Restart to restart your Macintosh.
7
After your Mac has restarted, open the Applications folder, then open the Utilities folder.
Open the Printer Setup utility and click the Add icon at the top of the printer list window.
(If you see a message that you have no printers available, click Cancel.)
8
In OS X 10.4.x, select the Stylus Pro 3800 and click Add. In OS X 10.3.9, select
EPSON USB at the top, then click Stylus Pro 3800 and click Add.
9
Close the printer list and any open windows, then eject the CD.
2000, XP, XP Professional x64 Edition, and Macintosh
®
interface, follow the steps in Chapter 1 of the Printer Guide to
®
Epson icon.
OS X 10.4.x
OS X 10.3.9
®
10/27/06 3:22:18 PM