Installing Software - Compaq Presario M2000 Hardware And Software Manual

Installing Software

To install software included with the notebook from a CD:
1. Insert an appropriate optical drive into the notebook
MultiBay II as instructed in the
Disc"
2. Connect the notebook to a reliable electrical outlet.
3. Close any open applications.
4. Insert a software CD into the optical drive.
❏
❏
5. When the installation wizard is displayed, follow the
installation instructions on the screen.
6. Restart the notebook if prompted.
✎
Repeat the installation procedure for all software you want to
install.
✎
WinDVD Creator has special drive requirements for proper
installation. To install WinDVD Creator, refer to the
instructions provided with the InterVideo WinDVD
Creator CD.
Hardware and Software Guide
in this chapter.
If Autorun is enabled an installation wizard is displayed.
If Autorun is disabled, select Start > Run. Enter:
x:\setup.exe
(where x is your CD drive designation), and then
select OK.
"Inserting or Removing a
Multimedia
4–13