Proper Riding Method; Starting The Engine - KYMCO CV3 Series Manual

Proper Riding Method

Starting the Engine

1. Lift up Main Stand before starting the engine.
2. Check oil and gasoline content before starting the engine.
Engine Stop Switch
: Engine will stop and cannot be started when setting
switch to this position. Re-start of engine is only possible
after setting the switch to
: The Engine can be started when setting the switch to
position.
this position.
3. The Main Power is cut off when the Engine Stop Switch
is set to the position, therefore pulling the Brake
Lever and pushing the Start Button will not activate the
motor.
4. The Engine Stop Switch is meant for a temporary engine
stop only.
1. Confirm that the KEYLESS car key is within sensing
range.
2. Press the main switch button to turn power ON.
3. Make sure the throttle grip is fully closed.
4. Confirm that the engine stall switch has been switched to
" ".
79
Proper Riding Method
Caution
5
3