Table of Contents
Advertisement
The Control
Panel
This section covers:
•
Adding or Removing
Hardware
•
Adding/Removing
Windows Components
•
Adding or Removing
Programs
Tip
If you are ever prompted for
Windows 2000 CD, go to the
following directory on your
hard drive: C:\i386.
2-2 N
C
OTEBOOK
ONFIGURATION
Adding or Removing Hardware
Most hardware devices are plug and play compliant. Windows
will locate the proper device driver or prompt you to insert the
media provided by your hardware manufacturer. Follow the
on-screen instructions and use any diskette or CD that has been
provided by your hardware manufacturer. If no diskette or CD
has been provided, you may find the drivers in the following
directory: C:\i386.
Adding/Removing Windows Components
To add or remove different components from Windows,
complete the following steps:
1. Click the Start button, point to Settings, then to
Control Panel.
2. Double-click the Add/Remove Programs
welcome dialog box is displayed.
3. Click the Add/Remove Windows Components button. The
Windows Components Wizard is displayed showing the
various components of your Notebook.
4. Select the component you want to configure, then click the
Details button. The Component Details dialog box
is displayed.
5. Select the component(s) you want to add or remove, and
click Next. The adding or removing process begins. You are
alerted when it is complete.
¤
icon. A
W
2000 O
INDOWS
PERATING
S
M
YSTEM
ANUAL
Advertisement
Table of Contents
