Epson WorkForce 320 Quick Setup Instructions
C11ca79201 all-in-one printer
Hide thumbs
Also See for WorkForce 320:
- Quick manual (56 pages) ,
- Specifications (2 pages) ,
- Basic operation gude (68 pages)
Advertisement
Quick Links
WorkForce
320 Series
®
Start Here
Read these instructions before using your product.
1
Unpack
Phone cord
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution: Do not connect to your computer yet.
2
Press the
On button.
*411867400*
*411867400*
French control
panel stickers
(included for
Power cord
Canada only)
3
Select settings
1
T o select English as your language, press OK.
( If you want to change the language, press or to
select it, then press OK.)
2
S elect your Country/Region and press OK.
3
S elect the current Daylight Saving Time setting (Winter
or Summer) and press OK.
4
S elect the Date format and press OK.
5
Press the number keys to enter the Date and press OK.
6
Select the Time format (12h or 24h) and press OK.
7
P ress the number keys to enter the Time. Then press
or to select AM or PM, if necessary.
8
Press OK.
4
Install ink cartridges
Note: Do not load paper yet.
1
L ift up the scanner.
2
Open the cartridge cover.
3
S hake the ink cartridges gently 4 or 5 times, then unpack
them.
Advertisement
Related Manuals for Epson WorkForce 320
Summary of Contents for Epson WorkForce 320
-
Page 1: Select Settings
WorkForce 320 Series ® Start Here Read these instructions before using your product. Unpack Phone cord Power cord Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. Turn on Connect the power cable. Caution: Do not connect to your computer yet. Press the On button. *411867400* *411867400* Select settings T o select English as your language, press OK. ( If you want to change the language, press or to select it, then press OK.) S elect your Country/Region and press OK. S elect the current Daylight Saving Time setting (Winter or Summer) and press OK. -
Page 2: Connect The Phone Cord
Remove only the yellow tape from each cartridge. aution: Don’t remove any other seals or the cartridges may leak. Insert the cartridges in the holder for each color. Press each cartridge down until it clicks. Close the cartridge cover. Press down until it clicks. Lower the scanner. P ress the OK button to charge the ink. Priming takes about 2½ minutes. ote: Your printer ships with full cartridges and part of the ink from the first cartridges is used for priming the printer. aution: Don’t turn off the printer while it is priming or you’ll waste ink. Load paper O pen the paper support and pull up the extensions. P ull out the output tray extensions and raise the stopper. S queeze the edge guide as you slide it all the way to the left. ip: If the clear plastic feeder guard is in the way, move it forward. L oad letter- or A4-size paper against the right edge and behind the tab, with the printable side face up. S lide the edge guide over. Connect the phone cord To fax, connect the included phone cord to a telephone wall jack and to the LINE port on your product. To connect a telephone or answering machine, see the Quick Guide. Note: If you’re connecting to a DSL phone line, you must use a DSL filter or you won’t be able to fax. Contact your DSL provider for the necessary filter. - Page 3 Install software M ake sure the printer is NOT CONNECTED to your computer. W indows : If you see a Found New Hardware screen, click ® Cancel and disconnect the USB cable. You can’t install your software that way. Insert your product CD. indows: If you see the AutoPlay window, click Run Setup.exe. If you see the User Account Control screen, click Yes or Continue. M acintosh : Double-click the Epson icon. ® Click Install and follow the on-screen instructions. W hen prompted, connect the USB cable. Use any open USB port on your computer. Make sure the printer is turned on. M ac OS X 10.4 only: When you see this screen, click ® Add Printer & Fax. Follow the steps on the right side of the Next screen to add your printer. Click F ollow the on-screen instructions to install the rest of the software and register your printer. W hen you’re done, remove the CD.
-
Page 4: Epson Technical Support
Any questions? Quick Guide Basic instructions for copying, printing, faxing, and scanning. User’s Guide Click the desktop shortcut to access the online User’s Guide, software downloads, Epson Supplies Central (requires an internet connection). On-screen help with your software Select Help or ? when you’re using your software. Epson Technical Support Visit epson.com/support (U.S.) or epson.ca/support (Canada) where you can download drivers, view manuals, get FAQs, or e-mail Epson. You may also speak with a support specialist by calling • U .S.: (562) 276-4382, 6 – 8 , Pacific Time, Monday through Friday, and 7 – 4 Saturday. • C anada: (905) 709-3839, 6 – 6 through Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Software Technical Support...