Installing Field Replaceable Units; Installing A Power Supply; Power Supply Overview - Cisco Catalyst 9500 Series Hardware Installation Manual

Installing Field Replaceable Units

•
•
•

Installing a Power Supply

Power Supply Overview

The switch chassis has two slots in which you can install power supplies using any of the following
combinations:
• Two AC, two DC or AC-DC power supplies
• One AC-input power supply or one DC-input power supply (leaving the blank cover on the other slot)
Note
This table lists the power supply models. To understand about the power supply modules supported on different
switch models, see
Part Number
C9K-PWR-1500WAC
C9K-PWR-1500WDC
Installing a Power Supply , on page 45
Installing a Fan Module, on page 54
Installing an SSD Module, on page 58
If you leave any power supply slots empty, you must ensure that the blank cover (Part Number
PWR-C6-BLANK) is installed in that slot to maintain the designed airflow.
Power Supply Slots, on page
C H A P T E R
13.
Description
1500W AC Power Supply
1500W DC Power Supply
Cisco Catalyst 9500X Series Switches Hardware Installation Guide
5
45