1.4 Secure installation
WARNING ‒ Risk of electric shock! Improper
installations are dangerous.
▶
Only connect and operate the device in accordance with the
information on the rating plate.
▶ Only connect the device to an alternating current mains via a
properly installed socket with earthing contact.
▶
The protective earthing system of the domestic electrical installation
must be installed in accordance with the electrotechnical regulations.
The installation must have a sufficiently large conductor diameter.
▶ When using an earth leakage circuit breaker, only use a type
with the mark.
▶ Never power the device through an external switching device,
e.g. a time switch or remote control.
▶
When the device is installed, the mains plug of the mains connection
cable must be freely accessible, or if free access is not possible, an
all-pole disconnection device must be installed in the permanently
installed electrical installation in accordance with the installation
instructions.
▶ When setting up the device, make sure that the mains cable is
not pinched or damaged.
Damaged insulation of the power cord is dangerous.
▶ Never bring the power cord into contact with hot device parts or
heat sources.
▶ Never bring the power cord into contact with sharp points or
edges.
▶ Never kink, crush or modify the power cord.
WARNING ‒ Risk of fire!
Using an extended power cord and unauthorized adapters is
dangerous.
▶ Do not use extension cords or multiple sockets.
▶ Only use adapters and power cords approved by the
manufacturer.
SafetyNL
5