Sylvania SP782 - Karaoke 2 X 8 Light Up Bluetooth Speaker Manual

Sylvania SP782 - Karaoke 2 X 8 Light Up Bluetooth Speaker Manual

Advertisement

Sylvania SP782 - Karaoke 2 X 8 Light Up Bluetooth Speaker Manual

warning
NOTE: This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.

Packing list

Upon opening the package, please check for the following items:

  • 1 x Speaker
  • 1 x USB charging cable
  • 1 x Instruction manual

Do's and Don'ts

  • Do not play music at excessive levels as damage to hearing and/or equipment may result.
  • Do not use outdoors in wet or in damp surroundings.

Specification

Input: DC 5V
Drivers: 2 x 8"Full Range
FM: 87.5~108.0 MHz
Battery Capacity: 1500mAh
Transmission Distance: 10m
Dimension: (WxHxD): 245x560x185mm

Product overview

Product overview

  1. Power/VOLUME -&+
  2. Charging Indicator
    RED=Charging
    Light off = Fully Charged
  3. DC interface (5V)
  4. MODE/LED ON
    (Long press to turn on/off light; Lightly press to enter into selection for Bluetooth, FM Radio, AUX Input, USB,TF)
  5. Previous track/TWS
  6. 6.Play/Pause/REC
  7. Next track
  8. TF/USB input
  9. AUX input
  10. MIC input

Playing recording function

  1. After the portable speaker is turned on, insert the TF Card or U disk to the TF slot or USB port, press the Mode button to the Bluetooth mode, connect it with your Bluetooth device and paly the music, long press the REC button around 3 seconds, you will here a prompt voice "ding" means the TF card/USB is starting recording, long press the play/pause button for 3 seonds again and you will here prompt voice"ding ding", that means stop recording.
  2. If you want to play this recording sound, press the Mode button to the USB or TF card mode, press the next button to find out this song and play it.

warning Note:

  1. When your TF card and U disk insert to the speaker at sametime, it will record to your U disk when recording.
  2. The recording only works in Bluetooth mode, can not recordin FM, Aux mode and can't record Microphone's sound.
  3. It's better to turn the Bleutooth devices volume to maximumduring recording.
  4. It will be stopped recording when pressing the mode buttonduring recording.

POWER SOURCE

  1. Please charge the unit at least 4 hours before first time using.
  2. Twist the dial clockwise/anticlockwise to switch on/off the unit.

CHARGE THE BATTERY

When the battery is charging, the CHARGE STATUS lights shows on the LED display is red. After the battery has fully charged, the light turns off.

  1. Connect the USB charge cable to the DC5V interface of the speaker firmly.
  2. When the battery is fully charged, please disconnect the USB charge cable from the speaker.
  3. The speaker works normally when charging.

POWER/VOLUME

Twist the dial clockwise/anticlockwise to increase/discrease the volume.
Twist the dial clockwise/anticlockwise to power on or off the unit.

PREVIOUS/NEXT BUTTON

Under playing status, press button to get back to a previous or next song.

PAUSE/PLAY BUTTON

To stop playing the current track, please press PAUSE/PLAY button on the control panel. Press it once again to continue playing.

MODE/LED ON

Long press to turn on/off light. Lightly press to enter into playing mode selection(Bluetooth, FM Radio, AUX Input, USB,TF).

AUX IN JACK

  1. Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman, etc, then select AUX by pressing the MODE/LED ON button on the control panel.
  2. Play from an external audio device.

MIC IN JACK

Plug in microphone directly for playing.

USB JACK

Insert USB directly for playing.

TF JACK

Insert TF card directly for playing.

FM FUNCTION

Lightly press MODE/LED ON button to switch to FM mode. Press PLAY/PAUSE button on control panel for automatic searching and saving the radio stations, by pressing PREVIOUS or NEXT you can select a previous or next radio station.

Bluetooth

Short Press MODE/LED ON button on control panel to select Bluetooth mode.
Simultaneously turn the Bluetooth setting on your phone, tablet or any other bluetooth enabled audio device and select "Syl SP782"(no need to match code), the unit and device will then connected via Bluetooth. Press the "NEXT SONG" and "PREVIOUS SONG" button on the control panel to select the song, press " PLAY/ PAUSE" button to control the playing status.

TWS: (True Wireless Speaker)

It needs two speakers to make a TWS. When you had two speakers, you can make a TWS as below steps:

  1. Don't connect to this speaker with Bluetooth devices.
  2. Turn on both speakers and press the mode button to change to Bluetooth mode.
  3. Press and hold the TWS button, the display shows 't on' that means the TWS on and it will enter to pairing mode. It will have a tone coming out after both speakers connected together. (If you want to turn this TWS off, press and hold again, the display shows 't off', It will be disconnected TWS connection).
  4. Turn the Bluetooth devices to search the Bluetooth name "Syl SP782" and tap to connect it. It will have a tone coming out from this speaker after connected successfully.
  5. Now you can play the music form your Bluetooth devices.

For service assistance and product information, please call:
1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3
www.curtisint.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sylvania SP782 - Karaoke 2 X 8 Light Up Bluetooth Speaker Manual

Advertisement

Need Assistance?

Do you have a question about the SP782 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents