Creative AIRWAVE MF8160 - Bluetooth Speaker Quick Start Guide

Overview

Top

1. Microphone
2. Volume controls
3. Multifunction button
4. LED Indicator

Back

5. NFC Receptor
6. USB port (For charging)
7. Bass port
8. Aux-In

Note: The AUX-IN has a fixed volume. To adjust the volume on the AUX-IN, adjust the volume control from the source device.

Pair it

NFC Pairing

Tap your NFC-enabled smart device on the back of the Airwave and they're paired.

Did you know?
You can use NFC to power ON the speaker. Simply just tap and go!

Manual Pairing

1. Press and hold the Multifunction button for 3 seconds to power ON the speaker.
2. Press and hold the Multifunction button until white LED blinks rapidly.
3. Select the Airwave from the list of discovered Bluetooth devices, and they're paired!

Use it

Play Music

Tip
To allow a second NFC or Bluetooth device to connect to your speaker, simply turn off the Bluetooth on your phone or tap again at the NFC receptor to disconnect.

Take Calls / Reject Calls

Press the Multifunction button to pick up an incoming call
OR
Press and hold the Multifunction button for 2 seconds and release to reject an incoming call

Useful information

Charge it up

Did you know?
You can check your battery's status by simply pressing the Multifunction button twice rapidly.

© 2013 Creative Technology Ltd. All rights reserved. Creative and the Creative Logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth^® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. aptX is a trademark of CSR plc. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Actual contents may differ slightly from those pictured. Use of this product is subject to a limited warranty.