Adjusting The Legs; Hot Surface Warning; Preparation; What To Do For Energy Saving - Beko B5RDNE504LXBR User Manual

4.4 Adjusting the Legs

If the product is not in balanced position,
adjust the front adjustable legs by rotating
them to right or left.

5 Preparation

What to do for energy saving

Read the "Safety Instructions" sec-
tion first.
• This refrigerating appliance is not inten-
ded to be used as a built in appliance.
• Do not keep the refrigerator doors open
for long periods.
• Do not place hot food or beverages into
the refrigerator.
5.1 What To Do For Energy Saving
• Do not overfill the refrigerator; blocking
the internal air flow will reduce cooling
capacity.
• Depending on the product's features; de-
frosting frozen foods in the cooler com-
partment will ensure both energy saving
and preserve food quality.
• Food shall be stored using the drawers in
the cooler compartment in order to en-
sure energy saving and protect food in
better conditions.
• Make sure the foods are not in contact
with the cooler compartment temperat-
ure sensor shown below.

4.5 Hot Surface Warning

The side walls of your product are equipped
with cooler pipes to enhance the cooling
system. High pressure fluid may flow
through these surfaces, and cause hot sur-
faces on the side walls. This is normal and
it does not require servicing. Be careful
when you contact these areas.
• Since hot and humid air will not directly
penetrate into your product when the
doors are not opened, your product will
optimize itself in conditions sufficient to
protect your food. Under these circum-
stances, functions and components such
as compressor, fan, heater, defrost, light-
ing, display and so on will operate ac-
cording to the needs by consuming min-
imum energy.
EN / 14