Advertisement
3
Place your bike on the rollers temporarily and check if the front
wheel axle is located 5 – 15 mm behind the front drum axle.
0 mm is ideal for the best steering, but may be too quick for
beginners.
If the front drum is located too far front or back, change the drum
position. (see Fig. C)
!
If the front drum is located too far front, the steering
character will become too heavy.
If the front drum is located behind the front wheel
axle, you may fall off forward easily when you just
push the handlebar.
4
When you use with the wheel smaller than 26-inch (like a 24-inch
or 650c), change the rear drum position to the more forward hole.
This is also for keeping your bike as level as possible. (see Fig. D)
How To Open & Fold the Frame
LiveRoll R500 is designed to be foldable into two for compact storage when not in use. (see Fig. E)
1
Hold the frame by hands and slowly open it.
!
Do not pinch your finger at
the frame joint.
2
Set the roller belt to the groove on the mid and rear drums, then
straighten the frame to apply tension to the belt. (see Fig. F)
Roller Belt must be hooked to the grooves on the end
!
caps properly.
If you have missed setting the belt, bend the frame to
loosen the belt then try again.
- 4 -
5 – 15 mm
(Fig. C)
(Fig. D)
(Fig. E)
(Fig. F)
Advertisement
