Table of Contents
Advertisement
3-6
Installing Memory
Read the following guidelines before you begin to install the memory:
• Make sure that the motherboard supports the memory. It is recommended that memory of
the same capacity, brand, speed, and chips be used.
• Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
• Memory modules have a foolproof design. A memory module can be installed in only one
direction. If you are unable to insert the memory, switch the direction.
3-6-1 Eight Channel Memory Configuration
This motherboard provides 16 DDR4 memory sockets and supports Eight Channel Technology. After the
memory is installed, the BIOS will automatically detect the specifications and capacity of the memory.
Enabling eight Channel memory mode will be eight times of the original memory bandwidth.
3-6-2 Removing and Installing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the power cord
from the power outlet to prevent damage to the memory module. Be sure to install DDR4 DIMMs on
to this motherboard.
Follow these instructions to install a DIMM module:
1.
Insert the DIMM memory module vertically into the DIMM slot and push it down.
2.
Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3.
Reverse the installation steps when you want to remove the DIMM module.
DIMM_P1_J0
DIMM_P1_I0
DIMM_P1_L0
DIMM_P1_K0
CPU1
DIMM_P1_O0
DIMM_P1_P0
DIMM_P1_M0
DIMM_P1_N0
2
System Hardware Installation
DIMM_P0_F0
DIMM_P0_E0
DIMM_P0_H0
DIMM_P0_G0
CPU0
DIMM_P0_C0
DIMM_P0_D0
DIMM_P0_A0
DIMM_P0_B0
1
- 28 -
2
Advertisement
Table of Contents
