Olympus CAMEDIA C-730 Ultra Zoom Basic Manual page 15

Power on/off
1
Before turning the camera on, press the tabs
on the lens cap in the direction of the arrows
and pull the cap off to remove it.
2
Press the POWER switch to turn on the
camera.
● The lens moves out when the mode dial is set
to any position other than
● The viewfinder turns on.
3
Press the POWER switch again to turn the
camera off.
Date/time setting
1
Set the mode dial to
the camera.
2
Press .
● The monitor turns on automatically and the top menu appears.
ñ
3
Press on the arrow pad to select
4
When is selected on the
screen, press
● Select any one of the following formats:
D-M-Y (Day/Month/Year)
M-D-Y (Month/Day/Year)
Y-M-D (Year/Month/Day)
● This step and the following steps show the procedure used when the
date and time settings are set to Y-M-D.
í
5
Press to move to the year setting.
Ññ
6
Press to set the year. When the year is set, press
the month setting.
● Repeat this procedure until the date and time are completely set.
● To move back to the previous setting, press
● The camera can only display the time in "consecutive hours," or what is
commonly known as military time. For example, 2:00 p.m. would 14:00
hours — in other words, 12 hours + 2 hours = 14:00 hours.
● The first two digits of the year cannot be changed.
.
, then press the POWER switch to turn on
Ññ
to select the date format.
POWER switch
.
É
.
En
Lens cap
í
to move to
15