Download Print this page
Fisher & Paykel DD24SCB7 Quick Start Manual

Fisher & Paykel DD24SCB7 Quick Start Manual

Preference options
Hide thumbs Also See for DD24SCB7:

Advertisement

Quick Links

Preference Options
You can change the setting of these options to suit your preferences or circumstances.
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the
most suitable settings before you start using your . dishwasher.
Option
What does it do?
Regulates the amount of rinse aid dispensed. Reduce this setting if there is excess foam after a wash.
Rinse aid
Increase this setting if dishes are wet or streaky after a wash.
Water
Refer to the 'Water softener' section of the 'User guide' for details.
softener*
Open
drawer
Your dishwasher is factory-set to automatically power on for 30 seconds whenever you open the
auto
drawer. You can turn this setting off.
power-on
Beeps at
end of
Your dishwasher is factory-set to beep six times at the end of a wash. You can turn this setting off.
wash
When this setting is on, the drawer will automatically lock 30 seconds after it's closed. It can then be
unlocked by pressing
Closed
drawer
autolock
(unless Keylock or Childlock is also activated). Useful in boats or motor homes.
When this setting is on,
will remain in the display after a wash to remind you that the dishes are clean. This is useful if you
Clean dish
prefer storing clean dishes in your dishwasher, taking out only what you need. When the last clean
indication
dish has been removed, press
to return to normal operating mode.
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCB7/Quick_Start_Guide_DD24SCB7/...
Updated: Sat, 28 Jan 2023 07:52:52 GMT
Powered by
1

Advertisement

loading

Summary of Contents for Fisher & Paykel DD24SCB7

  • Page 1 Clean dish prefer storing clean dishes in your dishwasher, taking out only what you need. When the last clean indication dish has been removed, press to return to normal operating mode. https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCB7/Quick_Start_Guide_DD24SCB7/… Updated: Sat, 28 Jan 2023 07:52:52 GMT Powered by...
  • Page 2 Rinse aid (after the lower tone). Which option am I Possible Option Example settings Rinse aid 1 to 5 Water softener* 4 indicators lit = setting is 4 0 to 5 https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCB7/Quick_Start_Guide_DD24SCB7/… Updated: Sat, 28 Jan 2023 07:52:52 GMT Powered by...
  • Page 3 For example, to change the Rinse aid setting from 4 (factory default) to 2, you need to press 3 times. Save Setting & Quit Menu • Press https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCB7/Quick_Start_Guide_DD24SCB7/… Updated: Sat, 28 Jan 2023 07:52:52 GMT Powered by...
  • Page 4 . This will save the new setting and quit the preference options menu. *This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted. https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCB7/Quick_Start_Guide_DD24SCB7/… Updated: Sat, 28 Jan 2023 07:52:52 GMT Powered by...