Insignia Rugged Speaker System XL NS-HLPS5018 Quick Setup Guide

PACKAGE CONTENTS

• Rugged Speaker System XL
• AC power cord
• Quick Setup Guide

FEATURES

• Bluetooth playback
• Line input
• Built-in FM tuner
• Built-in rechargeable battery
• USB slot
• Microphone function

Before using your new product, please read these instructions to prevent any damage.

Top

Side

CHARGING YOUR SPEAKER

• Connect one end of the AC power cord (included) to the AC power input socket on the unit and the other end to an AC power outlet. Turn on the unit before charging in order to display battery charging status. When charging, the 1, 2, and 3 charging indicator LEDs blink rapidly (GREEN) and the LOW indicator LED stays on (RED). When fully changed, all of the indicator LEDs stay on.

Note: You can also charge the unit when it is turned off, but the charging indicator LEDs will not light.

USB SLOT B: Charging an external device

• Use a USB cable (not included) to connect the USB SLOT B (DC 5V/1A) on your speaker system to an external device to charge it when your speaker system is turned on.

Checking the battery level

• The speaker is designed with a smart battery check feature for your convenience.
• Press the battery level button to show the current battery charge level when the unit is turned on and not charging.

USING YOUR SPEAKER SYSTEM

Connecting an audio device

LINE IN

• Your speaker system has an audio input jack that you can connect to an external audio source, such as a VCD, CD, VCR, or MP3 player.
  Use an audio cable (not provided) to connect the external device to the Line In jack on the top of your speaker system, then press the SOURCE button to select "LINE" mode.

Pairing your speaker system with a Bluetooth device

Your speaker system can store pairing information for up to eight Bluetooth devices, such as phones and tablets.

1. Make sure that your Bluetooth device supports the Bluetooth Ver.4.0+EDR protocol and is not paired with another device. To determine what Bluetooth protocol your device supports, see the documentation that came with your device.
2. Turn on your speaker system.
3. Press the SOURCE button to select "BT" to enter pairing mode.
4. Make sure that your Bluetooth device is within 30 feet of your speaker system.
5. Turn on your Bluetooth device, turn on Bluetooth, then set your device to pairing mode. For more information, see the documentation that came with your Bluetooth device.
6. On your Bluetooth device, select "NS-HLPS5018". Your speaker system pairs with the Bluetooth device.
7. Press PLAY/PAUSE to begin playback. The volume controls are also active.

Note: The Bluetooth device should reconnect to your speaker system automatically when it is turned on.

Basic playback

BUTTON	DESCRIPTION
POWER ON/OFF	Press to turn on/off the unit.
	Press repeatedly to select a signal source. Options include Bluetooth, LINE IN, USB, or TUNER mode.
	Press to stop playback in USB mode.
	Press to pause or resume playback. Hold down to disconnect Bluetooth.
	Press to skip to the next track.
	Press to return to the previous track.
MICROPHONE VOLUME KNOB	Use to adjust the volume of the microphone input.
MASTER VOLUME KNOB	Use to adjust the volume of the speaker.
BATTERY LEVEL	Press to check the current battery charge when your speaker system is turned on.

USB drive

• Insert a USB thumbdrive into USB SLOT A (5V/500mA). Your speaker system automatically switches to USB playback mode.

Microphone playback

• Connect an external microphone to the Microphone jack on the top panel of your speaker system. Use the Microphone Volume knob to adjust the sound level.

Tuner operation

• Press the SOURCE button repeatedly to select TUNER mode. The following buttons are used in tuner mode:

BUTTON	DESCRIPTION
	Press and hold to auto scan for radio channels. Press the STOP button to stop auto scanning. Press to toggle the next two buttons between preset selection and frequency adjustment.
	Press to skip to the next preset station. Press to fine tune (increase) the frequency manually.
	Press to skip to the previous preset station. Press to fine tune (decrease) the frequency manually.

SPECIFICATIONS

TROUBLESHOOTING

No power.

• Make sure that the AC power cord is connected securely.

No sound or sound is distorted.

• Turn up the volume on both your speaker and connected device.

The buttons on the speaker do not work.

• Turn off and unplug your speaker system, then reconnect the power cord and turn it on again.

SAFETY INFORMATION

• Read through this guide before making connections and operating this speaker system. Retain this guide for future reference.
• Don't open the case of this unit. There are no user-serviceable parts inside. Refer servicing to qualified personnel only.
• Turn off the speaker system when not in use. Turn off and disconnect the speaker system from the AC power supply when it is not being used for a long time.
• Don't install the speaker system in a place exposed to heating sources or direct sunshine.
• Don't install the speaker system in a place exposed to moisture or rain.
• Install the speaker system on a horizontal, flat, and firm surface with good ventilation. Never block the vents, which could cause malfunction from overheating.
• Use a soft, clean rag to clean the outside of the speaker system. Never clean it with chemicals or detergent.
• Only use attachments/accessories specified by the manufacturer.

For customer service, call 1-877-467-4289 (U.S. and Canada)
www.insigniaproducts.com

Documents / Resources

References

• Insignia Consumer Electronic Products

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Insignia Rugged Speaker System XL NS-HLPS5018 Quick Setup Guide