Table of Contents
Advertisement
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this
equipment. The exclamation point symbol alerts you to a general warning and the hazard
symbols refer to procedure-specific risks. When these symbols appear in the body of this
manual or on warning labels, refer back to these Warnings. Product-specific hazard symbols
and warnings not covered in this section may appear throughout the body of this manual where
applicable.
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or
explode. To help prevent fire and explosion:
•
Do not spray flammable or combustible materials near an open flame or sources
of ignition such as cigarettes, motors, and electrical equipment.
•
Do not use a paint or a solvent containing halogenated hydrocarbons.
•
Keep spray area well-ventilated. Keep a good supply of fresh air moving
through the area.
•
Sprayer generates sparks. Keep pump assembly in a well-ventilated area when
spraying, flushing, cleaning, or servicing. Do not spray pump assembly.
•
Do not smoke in the spray area or spray where sparks or flame is present.
•
Do not operate light switches, engines, or similar spark producing products in
the spray area.
•
Keep area clean and free of paint or solvent containers, rags, and other
flammable materials.
•
Know the contents of the paints and solvents being sprayed. Read all Safety
Data Sheets (SDSs) and container labels provided with the paints and solvents.
Follow the paint and solvent manufacturer's safety instructions.
•
Keep a working fire extinguisher in the work area.
Oil-based or Flammable Materials
Paint or solvent flowing through the equipment is able to result in static electricity.
Static electricity creates a risk of fire or explosion in the presence of paint or
solvent fumes. To help prevent fire and explosion when using oil-based or
flammable materials:
•
Connect the grounding wire and plug to a true earth ground.
•
If there is static sparking or if you feel a static charge, stop operation
immediately. Do not use sprayer until you identify and correct the problem.
•
All parts of the spray system, including the pump, hose assembly, spray gun,
and objects in and around the spray area shall be properly grounded to protect
against static discharge and sparks. Use Graco conductive or grounded
high-pressure airless paint sprayer hoses. Follow Grounding Instructions,
page 10.
•
Verify that all containers and collection systems are grounded to prevent static
discharge. Do not use pail liners unless they are anti-static or conductive.
3A9301C
Warnings
5
Advertisement
Table of Contents
