Westinghouse PW6IN1 Manual

PW6IN1 QUICK CHANGE NOZZLE
FOR WESTINGHOUSE PRESSURE WASHERS
WARNING
User must read and understand the operator's manual for their pressure
washer before using this accessory to reduce the risk of injury. Before
beginning any cleaning activity, spray the pressure stream in a safe
direction to make sure that all accessories are connected properly in
order to minimize the danger of injury or property damage. Fits most
pressure washers. Before using this attachment, make sure it is
compatible and is correctly installed. Risk of fluid injections. Do not point
at people, pets, electrical devices, or the unit itself. Wear eye protection
designated to conform with ANSI Z87.1. Before adding, replacing, or
modifying accessories, turn off the pressure washer, release the water
pressure in the trigger handle, and lock the trigger handle's lock out (if
one is provided with your pressure washer). Use only with cold water
and only outdoors. Store the accessory indoors. Save these guidelines.
Use them to train other users and refer to them frequently. Give the user
of the tool these instructions as well.
PRODUCT SPECIFICATIONS
Connection ..................................................1/4 in. Quick Connect Plug Inlet
Maximum Pressure..................................................................up to 3600 psi
Maximum Water Flow ......................................................................... 4 GPM
Maximum Water Temperature ..............................................................140°F
APPLICATIONS
You may use this product for the purposes listed below:
l Cleaning siding, polished and painted metal surfaces, outdoor furniture
fabrics, plastics, fiberglass, glass, and vehicles
FIG. 1
B
A - Spray lance [lanza pulverizadora, lance d'arrosage]
B - 6-in-1 nozzle (boquilla 6 en 1, buse 6 en 1)
INSTALLING THE QUICK CHANGE NOZZLE
See Figure 1.
This attachment installs on the end of the spray lance same as any nozzle
as described in your pressure washer's operator's manual.
l If necessary, remove the nozzle from the end of the lance.
l Pull back the quick-connect collar on the lance and insert the the 6-in-1
quick change nozzle. Push forward to secure the collar.
NOTE: Be sure the nozzle is securely locked into the spray lance.
USING THE QUICK CHANGE NOZZLE
Rotate the nozzle dial and align the arrows to the desired setting. Use the
following settings for recommended applications: 0° for spot cleaning or dif-
ficult to reach areas; 15° and 25° for general purpose or large surfaces; 40°
for cleaning decks, fences, and siding. SOAP/jet allows for long-range soap
application and SOAP/fan for short-range soap application.
NOTE: Before use, test the selected spray setting away from people, pets,
electrical devices, and other objects.
Service Hotline: (855) 944-3571
777 Manor Park Drive, Columbus, OH 43228
and Westinghouse are trademarks of Westinghouse Electric Corporation.
Used under license by MWE Investments, LLC.
© 2022 MWE Investments, LLC All Rights Reserved.
A
05000418-0 12/22 (REV:01)