Toro POWER MAX HD Service Manual page 65

Separating the Auger and Traction Assemblies (continued)
POWER MAX® HD Service Manual
3424-820 Rev A
7. Remove the 2 carriage bolts on the chute control rod.
8. Support the auger and traction housings with blocks of wood.
9. Remove the friction wheel plate return spring.
10. Remove the 3 cap screws on each side, connecting the auger to the traction
assembly and separate the sections.
Figure 46
Figure 47
Page 8–5 Auger Gearbox: Service and Repairs