Table of Contents
Advertisement
MB290
From this screen you can monitor the information or
configure your multifunction machine from the tabs:
•
D
: Displays the list of devices
EVICE SELECTION
managed by the PC.
•
C
: Presents the multifunction machine
OMPANION
screen.
•
C
: Displays the consumables status.
ONSUMABLES
•
L
: Displays links to the machine parameters and
INKS
address book.
Device management
This tab shows the list of devices managed by the PC.
Adding a device connected via USB
Make sure that your multifunction machine is powered off.
The connection between the PC and the machine
requires a USB 2.0 shielded cable no more than 3 meters
long.
The Companion Suite Pro software
Important
shall be installed to perform this
operation.
1 Locate your USB cable connectors and connect as
shown below on the picture.
2 Power on your multifunction machine.
The PC detects the device and the drivers are
automatically installed.
3 Once the installation is finished, a message
indicates that the drivers are installed correctly.
You can now use the multifunction machine to print or
scan your documents.
Adding a device connected to the network
You may connect your multifunction terminal to an
Ethernet or a wireless network.
The Companion Suite Pro software
shall be installed to perform this
Important
operation.
1 Run the Companion Monitor application by clicking
on the icon located on your desktop or from the
menu S
> A
TART
C
OMPANION SUITE PRO
M
.
ONITOR
2 Click the plus sign or A
3 The list of devices detected on the network
appears. Click on R
Detected devices appear with the following
information:
4 NetBIOS name (hardware identifier) or IP address
(device's identifier on the network).
5 Network name (user-defined). To define the name
of a device on the local network, refer to paragraph
Network features, page 49.
Only devices found on the same
local subnetwork as the PC are
automatically detected and
displayed. To add a device located
Important
on another subnetwork, refer to
paragraph Adding manually a
device connected to the network,
page 69.
6 Select your multifunction machine and click OK.
- 68 -
P
> OKIDATA >
LL
ROGRAMS
LL2 > C
-
OMPANION
button.
DD
to update the list.
EFRESH
Advertisement
Table of Contents
