Handle Alignment
The bars (straight and arched) of the doors may need to be loosened and adjusted to align door handles when fi nal fi t up
is done.
•
Open doors. Loosen (but do not remove) the two phillips head screws securing each bar.
•
Adjust bars so that handles are in line with each other.
•
Tighten screws when alignment is complete. Ensure door clips do not twist.
Figure 6
4
Hearth & Home Technologies • Contour Mesh Doors • 4017-238 Rev C • 08/08
Screws &
door clips on
the back of each
bushing
(2 per bar)
Alignment of Wooden Handles
Wooden Handles
Bars